Your cart
Manufacturer's recommended cleaning method:
- Turn off the power to the light, and where possible, unplug the mains socket.
- Remove noticeable contamination. Pay special attention to the light head and handle.
- Ensure the equipment is surface-cleaned and disinfected using an appropriate, non-abrasive cleaning agent (see recommended list below).
- Dry all surfaces thoroughly with a clean cloth and check for damaged surfaces, discolouration and/or contamination.
NOTE: Some DARAY products feature our BioProtect antimicrobial coating on painted finishes. This is designed to assist with infection control and is not a replacement for cleaning.
CAUTION: Our products are NOT waterproof. The equipment and accessories (included chargers and battery packs) MUST NOT at any point be saturated, to prevent water ingress. Use a damp cloth or saturated wipe if necessary. All electrical safety guidelines should be followed.
Any damage caused as a result of not following these guidelines will void any product warranty.
Some recommended surface agents:
- Cavicide™ products
- Isopropyl alcohol-based cleaners (<40% alcohol)
- Ethyl alcohol-based cleaners (<40% alcohol)
- Lysol® disinfectant
- Other non-bleach and non-abrasive disinfectants or cleaners
DO NOT USE agents containing the following:
- Organic, mineral and oxidizing acids (min. pH value 8.5)
- Bases (max. acceptable pH value 8.5)
- Oxidation agents (eg. Hydrogen Peroxide)
- Halogens (chlorine, iodine, bromide)
- Aromatic/halogenized hydrocarbons
- Bleach-based cleaners (eg. Clorox™, Sterilox™)
- Abrasive cleansers (eg. Comet Cleaner™)
- Acetone-based cleaners (eg. nail polish remover, Goo-off™)
- MEK (Methyl Ethyl Ketone)